System Cabling; Four Channel Mode Configuration Examples - AJA FS-HDR Installation And Operation Manual

Frame synchronizer/converter/hdr-wcg processor
Hide thumbs Also See for FS-HDR:
Table of Contents

Advertisement

4. Click Commit Uploaded Firmware when prompted after the upload is
finished. Progress bars show progress as the file is written to flash memory.
5. Click Restart FS-HDR with New Firmware to restart the FS-HDR. This will
take the FS-HDR offline for a minute or two. During the restart, progress is
shown in the connection area in the upper right corner of the FS-HDR Status
screen. After restart, the FS-HDR will be running the new software.
6. Once these steps are complete, the FS-HDR will be running the software,
and the Software Version on the Status screen shows the new version
number. Check that the new software is running by bringing up the FS-HDR
web page again; the software version is displayed at the top of all FS-HDR
web screens. If the FS-HDR did not update successfully, run through the
update steps again.
NOTE: The configuration of the FS-HDR prior to the upgrade is preserved. The unit
If there is a power outage or glitch during the software download, the FS-HDR
will boot the older software version and you can restart the upgrade process. This
happens because the FS-HDR has been designed with a safety feature where an
internal "safe" copy of the previous software is retained in the event the updating
process fails.

System Cabling

Four Channel Mode Configuration Examples

In Four Channel Mode each Video Processor can receive a different video signal
and independently process that signal. All incoming embedded audio, even on
inputs not routed to a Video Processor, are disembedded and sent to the Audio
Processor.
NOTE: In the following examples, U, V, W, X, Y, and Z represent different complete
Four Channel Mode Input Examples
Figure 7. Four Channel Mode, Four BNC Inputs
Signal W
Signal X
Signal Y
Signal Z
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
returns to service exactly as it was before the upgrade.
signals, which may be carried on one or more connectors.
Four Channel Mode
BNC Input
SDI !n 1 BNC
(w Embedded Audio)
SDI !n 2 BNC
(w Embedded Audio)
SDI !n 3 BNC BNC
(w Embedded Audio)
SDI !n 4 BNC
(w Embedded Audio)
SDI In 5 SFP
SDI In 6 SFP
SDI In 7 SFP
SDI In 8 SFP
HD/SD
Video Processor 1
HD/SD
Video Processor 2
HD/SD
Video Processor 3
HD/SD
Video Processor 4
All incoming embedded
audio is disembedded and
sent to Audio Processor
33
www.aja.com

Advertisement

Table of Contents
loading

Table of Contents