Table of Contents
Advertisement
Vid<n> UC 4X3PB
Vid<n> UC14X9PB
Vid<n> UCFLSCR
Vid<n> UC LBFUL
Vid<n> UC WDZM
Vid<n> UC Custom
V<n>i<HDR format>
V<n>o<HDR format>
V<n>i SDR BT.709 100 Nits
V<n>i SDR BT.709 <value>
V<n>NoClamp
V<n>100 Nits
Interaction of Presets and GPIs
If you use a GPI input trigger to recall a preset, the recall changes the GPI IN
Response setting to whatever GPI IN Response setting the preset contains. As the
following examples explain, this feature offers both the power of serial recalls and
the possibility of triggering a recall that changes GPI IN Response to something
unintended.
Example of a Serial Recall
The advantage of using GPI IN Response with presets is that you can trigger a
series or even a looping series of preset recalls. For example, suppose GPI IN 1
Response in Preset 1 is set to Preset 2, and GPI IN Response in Preset 2 is set to
Preset 1. Triggering the GPI will toggle between the two presets.
Example of an Unintended Recall
Suppose you trigger GPI IN 1 while the current GPI IN 1 Response parameter
is set to Preset 1. This recalls Preset 1 as expected. However, suppose Preset 1
contains a stored GPI IN 1 Response setting of No Action. If you trigger GPI IN 1
later, expecting to recall Preset 1 again, the FS-HDR instead performs No Action.
To prevent unexpected changes in the GPI IN Response parameters, set these
parameters as desired before storing presets; in the example, set GPI IN 1 to
Preset 1 before you store Preset 1.
3. 1 –4 GPI 1–4 OUT
The setting of this parameter determines whether certain FS-HDR events will
generate a GPI trigger output at GPI outputs 1, 2, 3, or 4. The GPI interface pinout
is presented in
No Action (default)
Alarm
No Video
No Ref
VIDEO Menu Group
The VIDEO Menu Group includes parameters for setting up various FS-HDR
system related features (video formats, audio level standards, etc.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Upconverts source to 4x3 pillarbox.
Upconverts source to 14x9 pillarbox.
Upconverts source to full screen.
Upconverts source from letterbox to full.
Upconverts source to a wide zoom.
Upconverts source to a Custom size.
Selects input High Dynamic Range/Wide Color Gamut format
Selects output High Dynamic Range/Wide Color Gamut format
Sets INPUT 2.1 Dynamic Range&Gamut to SDR BT.709 100 Nits and
also sets INPUT 2.2 SDR Highlights to Standard.
Sets INPUT 2.1 Dynamic Range&Gamut to SDR BT.709 100 Nits and
also sets INPUT 2.2 SDR Highlights to Soft1, Soft2, Soft3 or Bright.
Sets FORMAT 2.2 Dynamic Range Clamp to No Clamp
Sets FORMAT 2.2 Dynamic Range Clamp to 100 Nits
"GPI Pinouts" on page
128.
Does not trigger a GPI output regardless of event.
Generates a GPI out trigger if an internal alarm condition occurs.
Generates a GPI out trigger if no video is detected at the input.
Generates a GPI out trigger if no video is detected at the Ref input.
59
www.aja.com
Advertisement
Table of Contents
