Table of Contents
Advertisement
Technical Description
The FS-HDR features an incredibly flexible architecture, offering powerful Video
Processors for video conversion and processing, a separate Audio Processor, and
input and output video and audio signal routing. The FS-HDR has two completely
separate operating modes, selected with a menu parameter and then rebooting
the unit.
Four Channel Mode
In Four Channel Mode four independent HD/SD Video Processors are available,
Frame synchronization, genlock, and up, down and cross conversion is available
for a variety of video inputs and outputs. This mode also allows each Video
Processor to use any one of the other Video Processor's video as a background or
sidebar key.
Each Video Processor routes its output to dedicated SDI output ports, depending
on the transport configuration. For single link transport the output of Video
Processor 1 is sent to SDI Out 1 and SDI Out 5 (for use with an optional SFP
module). For dual link transport, the output of Video Processor 1 is routed to
the SDI Out 1 and SDI Out 2 pair, and also to the SDI Out 5 and SDI Out 6 pair.
In addition, any Video Processor output can be routed to the monitor BNC and
HDMI outputs.
Four Channel Mode supports frame rate conversion within the same "family" of
frame rates. These families are:
• 59.94/29.97/23.98
• 50/25
• 60/30/24
Audio processing is available for all input audio, and audio can be routed to any of
the Video Processors for embedding, and to any of the audio output connectors.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
11
www.aja.com
Advertisement
Table of Contents
