Cabling The System; Kona X Example Cable Connections; Kona X Audio Monitoring - AJA KONA X Installation And Operation Manual

Table of Contents

Advertisement

Cabling the System

KONA X Example Cable Connections

Figure 4.
Professional 12G-SDI
Video Camera
4K/UltraHD
Con dence Monitor
Digital VTR with 4K/UHD HDMI Out
HDMI Display for
4K/UltraHD with
Deep Color, HDR, HFR
In the KONA X system example above, a single link 12G-SDI camera signal and/or
a digital VTR with an HDMI 2.x output is received by the KONA X card, and is sent
to a Deep Color Display Monitor.
NOTE: The following connections are for the particular example shown above.
1. If desired, connect your house reference sync to the KONA X Reference
connector located on the top edge of the KONA X PCIe card.
NOTE: The KONA X card includes a mini-BNC reference connector for use with an
2. Connect an HDMI monitor to the KONA X card's HDMI output connector.
3. Connect the KONA X's SDI 2 BNC to the SDI output of the 12G-SDI video
camera.
4. Connect the KONA X's SDI 1 BNC to the input an HD SDI digital Confidence
Monitor.
5. Eight channels of embedded audio are supported, so the Digital VTR must
be configured accordingly.

KONA X Audio Monitoring

Supported KONA X hardware can be used as your single audio monitoring
solution whether you are auditioning music in a web browser, playing a movie file
on the desktop, creating music, or playing a YouTube clip. As long as the output
of your work or application is normally output via the host system audio, your
AJA hardware can route this audio for monitoring. This cuts down on unnecessary
cabling, and means you can take advantage of a consistent audio monitoring
environment whatever you are currently doing with your host system.
NOTE: On first use, you will need to tell your operating system to use AJA hardware as
KONA X and KONA Xpand Manual v1.0
Typical KONA X system connections
12G-SDI 4k/UHD Video
12G-SDI 4K/UHD Video
4K/UHD HDMI Video
4K/UHD HDMI Video
Numerous other workflows are possible including a wide variety of equipment
not shown here.
appropriate user-supplied cable, and in lieu of the optional KONA Xpand card.
the default Input and Output hardware.
Reference
Mini-BNC
Connector
Full-sized BNC
Connectors
KONA X Card
(in computer)
Full-sized HDMI
Connectors
14
Workstation Computer
with Video Editing
Application Installed
Computer
Monitor
www.aja.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kona xpand

Table of Contents