Without a properly configured default gateway (whether you have a router/
gateway or not), the FS-HDR will be unable to see other AJA FS devices on the
network, although you may still be able to control this FS-HDR via a web browser.
Also, without a proper gateway defined, the discovery feature on the Network
web page will not work correctly and list other FS devices on the network.
Variable
Alarm Configuration Screen
You can pop open the Alarm Configuration display at any time and on any screen
by clicking the gear button in the upper part of the Alarms panel.
To close the window, press the ESC key, or click the X in the upper right corner.
The Alarm Configuration display provides control over these alarm settings:
• Power Supply Alarm (see
• Video Format Alarm (see
• Reference Alarm (see
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Enter a default gateway or router address. This is only needed for
Static IP configurations. The factory Default Gateway is 192.168.0.1.
If IP Address Type is set to DHCP, the Default Gateway is set by the
DHCP server and cannot be changed by the user.
"5.1, 5.2 Power Supply 1-2 Alarm" on page
"6 Vid Format Alarm" on page 65
"7 Reference Alarm" on page 65
102
65)
www.aja.com