Table of Contents
Advertisement
Config Screen
The Config screen includes functions to name the FS-HDR, select the FS-HDR
operating Mode, hide or show unused menus, change the front panel display
brightness and fan speed, and configure UPnP.
System Name
The System Name parameter sets the name of the FS-HDR system. To change the
System Name, click on and drag the cursor across the displayed name, and type in
a new name. Hit enter when finished or click outside the name control to cancel.
The System Name is the same for both the Four Channel and Single Channel
modes of operation.
Variable
FS-HDR Mode
Selects whether the FS-HDR will operate in Four Channel or Single Channel mode.
A confirm dialog displays a warning that a reboot of the FS-HDR system will occur.
HD/SD
4K/UHD
SNMP Parameters
The following parameters are used to setup the FS-HDR SNMP (Simple Network
Management Protocol) feature.
• SNMP Enable
• SNMP Trap Dest 1
• SNMP Trap Port 1
• SNMP Trap Dest 2
• SNMP Trap Port 2
Refer to
FS-HDR supports it.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Highlight the existing name and type in a new name, up to 20
characters. Allowed characters are A-Z, a-z, numerals, hyphen,
spaces, and period.
After reboot the FS-HDR will operate in Four Channel (HD/SD) mode.
After reboot the FS-HDR will operate in Single Channel (4K/UHD)
mode.
"Chapter 6 SNMP" on page 120
for a description of SNMP and how the
105
www.aja.com
Advertisement
Table of Contents
