Table of Contents
Advertisement
connect to that have not already been discovered on the network. The devices
will be listed in the FS-HDR Network window. Once the devices appear on the
network, they can connect directly to other devices and computers without
involving the FS-HDR.
Enable (default)
Disable
Video Screen
The Video screen controls the FS-HDR's system wide video signal processing.
The parameters available on the Video browser screen are essentially identical
to the front panel display menus. The only difference is parameters are set using
webpage controls (drop down menus, slider adjustments) instead of control
knobs. Complete descriptions of these parameters are accessible using the
following cross references:
•
"1 Output Frame Rate" on page 60
•
"2 Genlock Source" on page 60
•
"3.1 Mon 2K Crop" on page 60
•
"3.2 HDMI RGB Range" on page 60
•
"3.3 Monitor Map" on page 60
•
"4.1 SDI1 3G Detect" on page 61
•
"4.2 SDI2 Input Protect" on page 61
•
"4.3, 4.5, 4.7 SDI3/5/7 3G Detect" on page 61
•
"4.4, 4.6, 4.8 SDI4/6/8 Input Protect" on page 62
•
"5.1 VidProc Bypass" on page 62
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Enables the FS-HDR to connect other AJA devices to the
network.
Disables the FS-HDR from serving as a proxy for AJA
devices.
107
www.aja.com
Advertisement
Table of Contents
