Table of Contents
Advertisement
Unpacking
Shipping Box Contents
An FS-HDR chassis is shipped with two AC power cords and any late-breaking
news bulletins (if applicable). Chassis rackmount brackets are provided as part of
the chassis with screws.
As you unpack the shipping box, carefully examine the contents. Ensure you
received everything and that nothing was damaged during shipment. If you find
any damage, immediately notify the shipping service and supply them with a
complete description of the damage. AJA will repair or replace damaged items.
If you find shipping damage, contact your AJA dealer or distributor for details on
how to have your FS-HDR repaired or replaced.
NOTE: Save packing materials and the shipping box. If your FS-HDR ever requires service
Installing Optional SFP I/O Modules
The optional AJA SFP I/O modules are purchased separately from the FS-HDR.
Install the optional SFP I/O modules by inserting them into the rectangular cages
on the back panel with the electrical connectors facing downward. Press gently
but firmly until the modules seat in the inside connectors.
You must remove any connected fiber or coaxial cables from the SFP modules
before you remove the modules from the FS-HDR. Pull down the SFP lever to free
the module before you withdraw the module from the cage.
For additional installation and operation details, see the instructions provided
with the SFP modules.
FS-HDR Chassis Installation
The following information will help you install the FS-HDR chassis correctly.
Physical Requirements for Mounting the Chassis
You can mount the FS-HDR chassis in two ways:
• Rackmounting—attach the FS-HDR (rear or front mounted) to a standard 19-
inch wide equipment rack. The chassis occupies only one vertical rack unit.
• Desktop—lay it on a horizontal flat surface.
Chassis Dimensions
When planning the equipment location, consider the chassis dimensions:
• Height—1 rack unit, 1.75 inches (4.5 cm)
• Depth—16 inches (40.65 cm)
• Width—17.5 inches (44.45cm)
• Weight—7.85 pounds, 3.56 kilograms
Cabling and Cooling Requirements
Observe these precautions when placing your FS-HDR:
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
or you move your system, use the packaging materials and box for safe shipment.
28
www.aja.com
Advertisement
Table of Contents
