Table of Contents
Advertisement
Interlaced
When Interlaced is selected, the system will assume that all sources are interlaced
(even if there is SMPTE 352 data to the contrary)
ANC Menu Group
IMPORTANT: In Four Channel Mode, the settings in this menu group apply only to the
1. 1 AFD Out
These parameters determine if and where the Video Processor will insert a SMPTE
2016 Active Format Descriptor (AFD) packet into its output video. The inserted
AFD code does not affect the Video Processor's conversion, but it may affect
downstream video processing if the signal is later converted.
Off (default)
Auto
>16:9
Full Frame
Pillarbox
Letterbox
14:9
4:3 Alt 14:9
16:9 Alt 14:9
16:9 Alt 4:3
1.2 AFD VANC Output Lines
This parameter determines which video output lines have AFD VANC inserted on
the output.
10 (default)
9–42
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
selected Video Processor (VID1- VID 4).
The FS-HDR does not insert an AFD code into the output.
If there is no AFD code on the input video, a "Full Frame" (8) code is inserted. If the
FS-HDR is converting, the appropriate AFD code will be chosen based on the convert
mode (see
"7 Upconvert Mode" on page 82
Always inserts a "Box > 16:9 (center)" AFD code (4), which indicates that the image has
an aspect ratio greater than 16:9 as a vertically centered letterbox within the 16:9
frame.
Always inserts a "Full Frame" AFD code (8), which indicates that the image is full frame,
with an aspect ratio that is 16:9.
Always inserts a "4:3 (center)" AFD code (9), which indicates that the image has a 4:3
aspect ratio as a horizontally center pillarbox image within the 16:9 frame.
Always inserts a "16:9 (with complete 16:9 image protected)" AFD code (10), which
indicates that the image is full frame, with a 16:9 aspect ratio and all image areas are
protected.
Always inserts a "14:9 (center)" AFD code (11), which indicates that the image has a 14:9
aspect ratio as a horizontally centered pillarbox within the 16:9 frame.
Always inserts a "4:3 (with alternate 14:9 center)" AFD code (13), which indicates that the
image has a 4:3 aspect ratio and with an alternative 14:9 centered pillarbox image
within the 16:9 frame.
Always inserts a "16:9 (with alternative 14:9 center" AFD code (14), which indicates
that the image has a 16:9 aspect ratio with an alternative 14:9 center within the 16:9
frame.
Always inserts a "16:9 (with alternative 4:3 center)" AFD code (15), which indicates that
the image has a 16:9 aspect ratio with an alternative 4:3 center within the 16:9 frame.
Adds AFD VANC to line 10.
Select which line other than 10 will have AFD VANC added.
and
"8 Downconvert Mode" on page
75
83)
www.aja.com
Advertisement
Table of Contents
