Region Of Interest (Roi) - AJA FS-HDR Installation And Operation Manual

Frame synchronizer/converter/hdr-wcg processor
Hide thumbs Also See for FS-HDR:
Table of Contents

Advertisement

1.6 Custom Right Crop
This parameter changes the Right picture crop position.
100% (default)
+10.0% to +100.0%
1.7 Custom Top Crop
This parameter changes the Top picture crop position.
100% (default)
+10.0% to +100.0%
1.8 Custom Bottom Crop
This parameter changes the bottom picture crop position.
100% (default)
+10.0% to +100.0%

Region of Interest (ROI)

The Region of Interest parameters select a portion of the input picture that will
be used for scaling and/or positioning. The selected area can then be scaled to
a standard pillarbox or letterbox size and shape (On Square), or it can be set to a
full screen input image (On Full). On Full may cause image distortion if it is used to
expand an odd-shaped region of interest to full screen.
NOTE: The ROI feature is not available in Single Channel Mode if both the inputs and
The ROI Setup mode allows you to preview the edges of your selected Region Of
Interest as you set it up. After selecting the desired region using the Setup Cursor,
you can take the region to air by setting Region Of Interest to On Square or On
Full.
The Setup mode is not required to operate the ROI feature. The edges of the
Region Of Interest can also be adjusted while in On Square or On Full modes
2.0 Region of Interest
This parameter turns the Region of Interest settings On or Off. When enabled,
the ROI Left, Right, Top, and Bottom controls define the rectangular shape and
position of the ROI.
Off (default)
Setup
On Square
On Full
Interactions occur between ROI settings and other parameters:
• The Region of Interest menu is not displayed when Active Format Description
(AFD) is in control of the Conversion Mode.
• Custom Size and Position settings work interactively with ROI, but Custom
Crop settings are disabled. Custom Size/Pos is also temporarily disabled while
in the ROI Setup mode.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Maintains the normal right side position of the selected format.
Enables changing the right side position.
Maintains the normal top position of the selected format.
Enables changing the top position.
Maintains the normal bottom position of the selected format.
Enables changing the bottom position.
outputs are UltraHD/4K.
Turns off the ROI feature.
Enables ROI cursor.
Enables ROI and sets video to a pillarbox or letterbox shape.
Enables ROI, and expands the ROI area to full screen.
86
www.aja.com

Advertisement

Table of Contents
loading

Table of Contents