Table of Contents
Advertisement
After downloading the software update to your local drive, use the Browse
button to locate the local software copy. Follow the prompts to load the new
firmware into the FS-HDR. See
more information.
Video Channel Screens
The Video Channel screens control the FS-HDR's video signal processing of that
channel (either four or one, depending on mode). In Four Channel Mode four
menu groups are selected on the left. In Single Channel Mode only one menu
group is available.
The parameters available on the Video Channel browser screens are essentially
identical to the front panel display menus. The only difference is parameters are
set using webpage controls (drop down menus, slider adjustments) instead of
control knobs. Select the right arrow to display the video channel of interest, and
select a category (such as 'Input') to view and change related parameters.
Input Screen
Complete descriptions of the parameters on this screen are accessible using the
following cross references:
•
"1 Input" on page 72
•
"2.1 Dynamic Range&Gamut" on page 73
"2.2 SDR Highlights" on page 73
•
•
"3 Loss of Input" on page 73
•
"4 Reverse Telecine" on page 73
•
"5 Input Scan Format" on page 74
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
"Software Update Installation" on page 32
112
for
www.aja.com
Advertisement
Table of Contents
