Table of Contents
Advertisement
Presets and FS-HDR Operating Mode
Independent sets of FS-HDR Presets exist for Four Channel and Single Channel
mode. Forty presets are available in each mode, each can be given a different
name, and storing or recalling a preset in Four Channel mode will not affect
FS-HDR operation in Single Channel mode.
Caution! In Four Channel Mode, each Preset saves all the settings for all four
channels. Storing and recalling a Preset will affect all the settings for all four
channels in that mode. Care must be taken to establish a policy for the use of
FS-HDR Presets, especially if the FS-HDR is operated in Four Channel mode and
the different channels have different users.
Parameter Menus
The FS-HDR display presents five major types of menu pages:
• Status pages—present status information that cannot be changed.
• Simple parameter menus—contain a parameter number and name on line 1
and its current value setting on line 2. The line 2 value can be changed using
SELECT and ADJUST. Example: Output Format.
• "Take action" parameter menus—contain a parameter number and name
on line 1, and the value to "take" on line 2. A "take" prompt may appear on
line 3. The line 2 value can be changed using SELECT and ADJUST, and the
take or switch to the new value occurs when you press ADJUST momentarily.
Examples: Preset Save/Recall.
• Multiple field parameter menus—contain a parameter number and name
on line 1 and its current value setting on line 2, consisting of multiple letter
or number fields that must each be set individually. The line 2 fields can be
changed using SELECT and ADJUST. Example: IP Address.
• Hidden parameter menus—a "parent" menu exists that, when that parent
parameter is turned on, can display "child" menus of related parameters.
When the Hidden Menus parameter is set to Hide Inactive, these child menus
are hidden when the parent parameter is off. Some menu names contain a
decimal (dot) number and zero, which indicates there are a group of related
parameters. Example: 1.0 ProcAmp is the parent menu of the 1.1 through 1.4
child menus.
NOTE: In this chapter, menus unique to an FS-HDR operating mode will be indicated as
STATUS Menu Group
The Status Menu Group contains a series of Status display pages that you can
scroll using the SELECT knob. The various Status pages are actually just displays,
not menus, since they don't include menu numbers or editable values. The
ADJUST knob doesn't affect the Status Menu Group display pages.
System Status
This menu shows the FS-HDR's System Name, IP address and mask, and version
number.
IP addr
IP Mask
Version
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
(4Ch only) or (SingleCh only). Other menus are identical in both Four Channel and
Single Channel modes.
System Name
Displays the System Name as set in Config menu 1.
value
Shows the IP address.
value
Shows the IP mask.
value
Shows the software version number.
54
www.aja.com
Advertisement
Table of Contents
