Table of Contents
Advertisement
COLOR Menu Group
IMPORTANT: In Four Channel Mode, the settings in this menu group apply only to the
1.0 Proc Amp Enable (YUV)
This parameter turns the Proc Amp On and Off for signals composed of YUV
components. When it is On, you can set additional parameters to control video
Gain, Black Level, Hue, and Saturation.
Off
On
Source Memory
Independent Proc Amp parameter values are kept for each input format.
1. 1 Proc Amp Gain
This parameter adjusts the video gain from 0 to 1.5 times luma in 0.01 steps
Variable
1.2 Proc Amp Black
This parameter adjusts the video black level from -20 IRE to +20 IRE in 0.5 steps.
Variable
1.3 Proc Amp Hue
This parameter adjusts the video color hue through 360 degrees (color wheel) in
1 degree steps.
Variable
1.4 Proc Amp Sat
This parameter adjusts the video color saturation from black and white to 1.5
times chroma in steps of 0.01.
Variable
3.0 Video Legalizer
These parameters allow adjustment of signal levels to meet legal broadcast
requirements. When set to Off, the Video Legalizer is not enabled, and the
following clip controls are not active. In YUV mode, the White Clip, Black Clip,
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
selected Video Processor (VID1- VID 4).
(default)
Sets the YUV Proc Amp to Off.
Sets the YUV Proc Amp to On.
Adjusts Proc Amp Gain from zero to 1.5 in 0.01 steps.
Default (unity): 1.0
Adjusts Proc Amp Black level from -20 IRE to +20 IRE in 0.5 steps.
Default (unity): 0 IRE
Adjusts Proc Amp Hue from -179 to +180 in steps of 1 degree.
Default (unity): 0 degrees
Adjusts Proc Amp Saturation from 0 (black & white) to 1.5 (Chroma)
in steps of 0.01.
Default: 1.0
77
www.aja.com
Advertisement
Table of Contents
