Table of Contents
Advertisement
Video 1-4
Genlock
Video Input Status
Audio Output
Figure 38. Status Screen, Single Channel Mode
The Status screen in Four Channel Mode is the same as Single Channel Mode,
except:
• Status information for only Video 1 is displayed (no Vid Proc 2, 3, or 4)
• Input and Playback Image Mapping statuses are displayed.
• Background Video status is not displayed (can only be Black or Matte)
• Audio Vid 2-4 Embed parameters are not displayed.
• The following additional items are displayed:
Video 1
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
INPUT
Shows the input source and format.
OUTPUT
Shows the output video selection and format.
Caption Translator
Shows the caption selection and caption signal presence.
Freeze Output
Shows whether Freeze Output is On or Off.
Proc Amp
Shows whether the Proc Amp is On or Off.
Color Corrector
Shows whether the Color Corrector (RGB) is On or Off.
UFC Custom
Shows whether Custom conversion, AFD, and ROI are On or Off.
Background
Shows the current background signal (Black or Matte).
Genlock Source
Shows the source of the genlock reference, and its format.
SDI 1 - 8
Shows the status of each Video input (BNCs and SFPs).
Global Audio Output
Right-clicking on the Global Audio Out parameter value lets
you select a global output. That same audio will be sent to all
the FS-HDR audio outputs. When set to Off, the other Audio
Outputs display their selected value, otherwise only the Global
Audio Output setting is displayed.
AES
Each of these settings, when visible, reports the audio that is
MADI BNC
currently being routed to that audio output. Mute and Sig Gen
MADI Fiber
is reported when all of that port's outputs have that setting.
Vid1-4 Embed
Map is reported when the port's outputs are mapped.
Input Image Mapping
Output Image Mapping
Shows either Auto, Quadrant or 2SI.
Shows either Quadrant or 2SI.
104
www.aja.com
Advertisement
Table of Contents
