Table of Contents
Advertisement
• IP settings, MAC address
• SNMP settings
• Alarm control
• Hidden Menus, Screen Saver, and Display intensity
• Fan speed
• System serial number and software version
• System reboot
AUDIO
Displays the System Audio Menu Group, which lets you change or enable system
audio functions:
• MADI Output mode
• Audio Input Sample Rate Conversion (Embedded, AES, MADI
• 5.1 and 7.1 Mixdown
• Global Audio Output
• Reset Channel Mapping (Embedded, AES, MADI)
PRESET
Displays the Preset Menu Group, which accesses the memory registers:
• Store, Recall, and edit the names of Presets
• Factory Preset (defaults)
Channel Select Buttons
VID1-4
Selects which Video Processor the nine VIDEO buttons will access menus for
control. In Single Channel Mode any button can be pressed.
Blue = A valid video source is present.
Red = An invalid video source is detected (unless the alarm has been suppressed,
in which case the LED will be turned off).
Off = No video is present, or invalid video is detected and the alarm is suppressed.
NOTE: The FS-HDR operating mode can be determined by the VID 1-4 button tallies. In
EMBED
Selects Embedded Audio for control by menus accessed by the three AUDIO
Menu Group buttons.
Blue = Valid embedded audio is present on any video source.
Off = No embedded audio is detected.
AES
Selects AES and MADI for control by menus accessed by the three AUDIO Menu
Group buttons.
Blue = Valid AES or MADI audio is present.
Off = No AES or MADI audio is detected.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Four Channel Mode all four LEDs light, with the selected Video Processor high
tally. In Single Channel Mode only the VID1 button tally is low tally or high tally.
21
www.aja.com
Advertisement
Table of Contents
