Table of Contents
Advertisement
3 and 4,..., Channel 15 and 16. The default Global setting applies the currently
set Global delay value to all eight input channel pairs. The factory default Global
setting is 0 seconds delay, but whatever value the user changes this setting to will
be applied when Global is selected.
Global (default)
Channel Pair
When Channel Pair mode is selected:
• Each of the individual eight SDI1 audio input channel pair delay values are
applied to the input delay of each channel pair.
• The range of delay is -128 to +12288 in units of samples where 48 samples = 1
millisecond.
Switching from Global to Channel Pair will apply the individual delay values that
were set for each individual channel pair. Switching from Channel Pair to Global
will apply the same currently set Global delay value to all the channel pairs.
1. 1 SDI 1 Delay Global
When Global is selected above, the individual SDI 1 audio channel pair menus are
hidden
SDI 1 Delay Global
1. 1 -1.8 SDI 1 Channel Pair Delay
When Channel Pair is selected above, eight individual SDI 1 audio channel pair
menus become available, permitting adjusting the delay of each input channel
pair.
• Delay adjustment range is -128 to +12288 in units of samples where 48
samples = 1 millisecond. The Front Panel displays the delay in milliseconds
and as fractions of milliseconds in units of samples.
2.0 - 8.0 SDI2-8 Delay
Same as 1.0 SDI1 Delay menu, except for SDI inputs 2 through 8, and similar delay
adjust submenus are available.
AES/MADI Delay Menus
When AES is selected, Delay parameter menus for AES and MADI input audio are
displayed. These menus are the similar to those used for Embedded Audio SDI1
Delay.
1.0 AES Delay
Sixteen AES Level menus (and related submenus) are available.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
All eight SDI1 audio input channel pairs are set to the current Global
delay value. Individual channel adjustment menus are hidden.
Each of the eight SDI1 audio input channel pairs delay values are
applied to the input of each channel pair, and the channel pair
adjustment menus become available.
The ADJUST knob sets the Global delay value. Adjustment range is
-128 to +12288 in units of samples where 48 samples = 1
millisecond.
The Front Panel displays the delay in milliseconds and as fractions of
milliseconds in units of samples.
94
www.aja.com
Advertisement
Table of Contents
