Table of Contents
Advertisement
Vid Alarm
(Single Ch only) This menu shows the Video Processor 1 alarm status. Absence of
alarm shows as OK. If selections are incompatible, the status of the affected signal
shows Incompat.
IN
GEN
Rate
SDI Input
This menu shows the status of all eight SDI inputs.
SDI1
SDI2
SDI3
SDI4
Monitor Output
This menu shows the status of the monitor outputs (BNC and HDMI).
Monit
Fmt
Crop
AES Input
This menu shows the status of all eight AES channel pair inputs. Each can carry a
stereo digital audio signal.
AES1
AES2
AES3
AES4
MADI In/Out
This menu shows the status of the MADI audio inputs and outputs.
BNC In
BNC Out Mode
Fib In
Fib Out
Power/Temp Alarm
This menu shows the power supply status of the FS-HDR and the temperature
status. If a power supply is unplugged, the display indicates PS OFF or PS Error.
PS1 Alarm
PS2 Alarm
TmpAlarm
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Input Source(s)
Status
Genlock Source
Status
Status
Status
SDI5
Status
Status
SDI6
Status
Status
SDI7
Status
Status
SDI8
Status
Status
Status
Status
Status
AES5
Status
Status
AES6
Status
Status
AES7
Status
Status
AES8
Status
Mode
Status
Mode
Status
Mode
Status
Status
Status
Video input source alarm status.
Selected Genlock source alarm status.
System Output Frame Rate (59/29/23.98, 50/25, 60/30/24)
Statuses for SDI inputs 1-8: (Format, No Input, No SFP)
Output selected for monitoring (Vid1-4 Out)
Output format.
Crop status (Off, On).
Statuses for AES inputs 1-8: (Present, No Input)
BNC input mode (56ch, 64ch), status (Present, No Input)
BNC output mode
Fiber input mode, status
Fiber output mode.
Displays the state of the PS1 power supply (OK or ERROR).
Displays the state of the PS 2 power supply (OK or ERROR).
Displays a temperature alarm if the FS-HDR overheats.
56
www.aja.com
Advertisement
Table of Contents
