Table of Contents
Advertisement
1.0 SDI1 Level
This parameter selects the Audio Level Mode for all 16 SDI1 audio input channels.
The default Unity setting applies 0.0. db gain to all the input channels
Unity (default)
Adjust
When Adjust mode is selected:
• After selecting an individual channel adjustment menu, the ADJUST knob
changes the value shown by 0.5 dB (up or down) for each knob detent.
• The range of adjustment is -18.0dB to +18.0dB.
• Switching from Unity to Adjust will apply the individual level values that were
set in the Adjust mode to the input for each of the channels. Switching from
Adjust to Unity will apply unity (0.0dB) to all channels.
1. 1 -1. 1 6 SDI1 Level Ch 1
When Adjust is selected above, individual SDI 1 audio channel menus become
available, permitting +/- 18.0 dB level adjustment to each input channel.
2.0-8.0 SDI2-8 Level
Same as 1.0 SDI1 Level menu, except for SDI inputs 2 through 8, and similar level
adjust submenus are available.
9.0 SDI1 Phase
This parameter selects the Audio Phase Mode for all 16 SDI1 audio input channels
The default Unity setting applies normal (non-inverted) phase to all the input
channels.
Unity (default)
Adjust
When Adjust mode is selected:
• After selecting an individual channel adjustment menu, the ADJUST knob
toggles the Phase value shown between Normal and Invert. When Invert is
selected the phase of the audio input on that channel will be inverted.
Switching from Unity to Adjust will apply the individual Phase values that were
set in the Adjust mode to the input for each of the channels. Switching from
Adjust to Unity will apply unity (Normal) to all channels.
9. 1 -9. 1 6 SDI 1 Phase
When Adjust is selected above, individual SDI 1 audio channel menus become
available, permitting inverting the phase of each input channel.
10.0 - 16.0 SDI2-8 Phase
Same as 9.0 SDI1 Phase menu, except for SDI inputs 2 through 8, and similar
phase adjust submenus are available.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
All 16 SDI1 audio input channels are set to 0.0 dB. Individual channel
adjustment menus are hidden.
Each of the 16 SDI1 audio input channel adjusted values are applied to
the audio processor, and the individual channel adjustment menus
become available.
All 16 SDI1 audio input channels are set to Normal phase. Individual
channel adjustment menus are hidden.
Each of the 16 SDI1 audio input Phase values (either Normal or Invert)
are applied to the audio processor, and the individual channel
adjustment menus become available.
92
www.aja.com
Advertisement
Table of Contents
