Table of Contents
Advertisement
NOTE: The STATUS menu always shows the FS-HDR's current Ethernet settings. The
Vid 1/2 I/O
(4Ch only) This menu shows the current primary video settings for Video
Processors 1 and 2.
IN1
OUT1
IN2
OUT2
Vid 3/4 I/O
(4Ch only) Same as Vid 1/2 I/O status menu, except for Video Processors 3 and 4.
Vid I/O
(SingleCh only) This menu shows the current primary video settings for Video
Processor.
IN
GEN
OUT
Vid CC
Vid 1 Format
(4Ch only) This menu shows the current primary video settings for Video
Processor 1.
IN1
BKGD
GEN
OUT1
Vid 2-4 Format
(4Ch only) Same as Vid 1 Format menu, except for Video Processors 2-4.
Vid 1 Alarm
(4Ch only) This menu shows the Video Processor 1 alarm status. Absence of alarm
shows as OK. If selections are incompatible, the status of the affected signal
shows Incompat.
IN1
BKGD
GEN
Rate
Vid 2-4 Alarm
(4Ch only) Same as Vid 1 Alarm menu, except for Video Processors 2-4.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
parameters shown on the CONFIG Menu Group IP configuration menu may not
display the values the unit is currently using.
Input Source
Output Source
Input Source
Output Source
Input Source(s)
Genlock Source
Format
Input Source
Backgd Source
Genlock Source
Input Source
Backgd Source
Genlock Source
Format
Selected (physical) video 1 input & detected format.
Format
Selected video output 1 format & selected audio input
used on output.
Format
Selected (physical) video 2 input & detected format.
Format
Selected video output 2 format & selected audio input
used on output.
Format
Selected (physical) video 1-4 inputs & detected format.
Status
Selected Genlock source and format.
AudIn
Selected video output format & selected audio input
used on output
Status
Closed Caption status
Format
Selected video input source and format.
Selected Background video source.
Format
Selected Genlock source and format.
Format
Selected video output format.
Status
Video input source alarm status.
Status
Selected Background video source alarm status.
Status
Selected Genlock source alarm status.
Status
System Output Frame Rate (59/29/23.98, 50/25, 60/30/24)
55
www.aja.com
Advertisement
Table of Contents
