Sub-Menus; Screen Descriptions; Network Pane And Network Configuration Screen - AJA FS-HDR Installation And Operation Manual

Frame synchronizer/converter/hdr-wcg processor
Hide thumbs Also See for FS-HDR:
Table of Contents

Advertisement

Sub-Menus

Some parameters, when activated, open sub-menus. The sub-menus are a lighter
gray color and have a collapse/expand button on the parent selection. This
lets you collapse the sub-menus to make it easier to configure the system. The
collapsed setting only stays in effect until the user reconnects or refreshes the
browser.

Screen Descriptions

Now that you have had an introduction to how the FS-HDR browser works and
how to navigate the screens, each screen and its settings are described in detail
(click to jump).
"Network Pane and Network Configuration Screen" on page 100
"Status Screen" on page 103
"Config Screen" on page 105
"Video Screen" on page 107
"Audio Screen" on page 108
"Presets Screen" on page 109
"Remote Screen" on page 111
"Firmware Screen" on page 111

Network Pane and Network Configuration Screen

The Network pane on the right side of any screen lists the AJA devices that
appear on the network. This pane includes three additional controls:
• Hover the cursor over any system name to see its IP address.
• Right-click any system and select Identify to blink the system ID LEDs.
• Click the gear-shaped icon in the Network pane (or select Network from the
Menu list on the left side of the screen) to open the Network Configuration
screen listing FS-HDR network settings.
The Network Configuration screen allows you to view and change your FS-HDR's
network settings and then click Apply to activate them.
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
100
www.aja.com

Advertisement

Table of Contents
loading

Table of Contents