Matte Luma; Matte Chroma; Matte Hue; Timing Menu Group - AJA FS-HDR Installation And Operation Manual

Frame synchronizer/converter/hdr-wcg processor
Hide thumbs Also See for FS-HDR:
Table of Contents

Advertisement

The Crop and Sidebar Edge controls are additive; increasing Sidebar Edge
(making the sidebars larger and the center-video smaller), equates to setting Left
and Right Crop values to smaller percentages. The Sidebar Edge can be set to 0
through +128. A value of 0 produces a 4:3 center. Positive values produce wider
sidebars (and a narrower center).
0 (default)
0 to +128 (Variable)

3. 1 Matte Luma

This parameter determines the Matte Luma level of the background fill.
50%
0–100% (Variable)

3.2 Matte Chroma

This parameter determines the Matte Chroma level of the background fill.
50%
0–100% (Variable)

3.3 Matte Hue

This parameter determines the Matte Hue of the background fill.
0 degrees
0–359 degrees (Variable)
NOTE: On the front panel, as you turn the Matte Hue ADJUST knob the values wrap from

TIMING Menu Group

IMPORTANT: In Four Channel Mode, the settings in this menu group apply only to the
These parameters adjust Video Processor horizontal and vertical output timing in
reference to the genlock source already selected, and permits adding up to 6 full
frames of output delay.
NOTE: Unlike most knob-adjustable parameters, on the front panel menu this

1 Output Timing H

When adjusting the horizontal timing (H), this parameter specifies a number of
pixels to offset, from zero to full line width. Adjustment range increments from
0 to the width of the line in pixels. The maximum value varies, depending on the
format already chosen.
Variable
FS-HDR Frame Synchronizer/Converter/HDR-WCG Processor v1.0r1
Defaults to 0. Select a width value from 0 through +128 to expand
or shrink the sidebars, which are filled with Background video (4
Background Fill). Selecting a larger value causes the center picture
to become narrower while the sidebars expand.
(default)
Sets the matte luminance level to the default 50% value.
Sets the matte luminance level from 0–100%.
(default)
Sets the matte chrominance level to the default 50% value.
Sets the matte chrominance level from 0–100%.
(default)
Sets the matte hue to the default 0 degrees (red).
Sets the matte hue to a value between 0 and 359 degrees.
359 back to 0 degrees.
selected Video Processor (VID1- VID 4).
parameter automatically wraps around from the maximum value to 0 (and vice
versa).
Adjustment range increments from 0 to the width of the line in
pixels. The maximum varies, depending on the format chosen.
Default: 0
88
www.aja.com

Advertisement

Table of Contents
loading

Table of Contents