How To Select The Mark Inscription Position - Furuno FAR-2218 Operator's Manual

5. VIDEO PLOTTER OPERATION
• [ORIGIN MARK(SYM)]: Inscribes an origin mark symbol, with no mark number.
You can set one of the following symbols as the origin mark. See section 5.5 for
details.
• [MAP MARK]: Inscribes the selected map mark.
• [WP1-50], [WP51-100], [WP101-150], [WP151-198]: Inscribes a waypoint
marker number within the selected range. For detailed information regarding
waypoints, see section 5.9.
• [OWN SHIP SHAPE]: Inscribes a mark with the same shape as own ship. For
detailed information regarding the own ship mark, see section 5.6.
6. Close the menu.
5.3

How to select the mark inscription position

You can select the location at which the marker is inscribed.
1. Open the menu.
2. Select [2 MARKS].
For A/B/W-types with Radar Plotter functionality, this menu appears as [2
MARKS•CHART].
3. Select [5 RADAR MAP].
The [RADAR MAP] menu appears.
Note: You can also right-click the [MARK] box to open the [RADAR MAP] menu.
4. Select [4 MARK POSITION].
5. Referring to the table below, select the appropriate location.
Location
[CURSOR]
[OWN SHIP]
[L/L]
How to set the co-ordinates
Where [4 MARK POSITION] is set to [L/L], the co-ordinates settings are dis-
played. Co-ordinates can be set one digit at a time, as shown in the figure below.
028º 00.200 S
153º 43.100 E
1) Spin the scrollwheel to change the value, then left-click to move to the next
digit.
2) Repeat step 1 to adjust the Latitude and Longitude as appropriate.
6. Close the menu.
5-2
You can select the location using the Control Unit.
Marker is placed at own ship position.
Marker is placed at the co-ordinates selected.
Currently selected digit is highlighted by the cursor.
Left-click to move to the next digit.
Roll the scrollwheel to change the value.
N - North (Latitude)
S - South (Latitude)
W - West (Longitude)
E - East (Longitude)
Description