How To Adjust The Brilliance And Color Tone; Adjust The Brilliance With Control Panel; Select The Brilliance - Furuno FAR-1416 Operator's Manual

1. OPERATIONAL OVERVIEW
1.5

How to Adjust the Brilliance and Color tone

1.5.1

Adjust the brilliance with control panel

1. Use the BRILL knob to adjust the brilliance as appropriate. Turn clockwise to in-
crease the brilliance, counter-clockwise to reduce the brilliance.
2. Push the BRILL knob to complete the procedure.
Note: External monitor brilliance is not adjustable from the radar. Refer to the external
monitor's Operator's Manual for how to adjust brilliance.
1.5.2

Select the brilliance

The screen brilliance and color tone can be adjusted as shown below. The preset vari-
ations are following.
Color (Icon)
Day
Dusk
Night
1. Press the CURSOR ON/OFF key when cursor is not shown on the screen.
2. Move the cursor onto the [BRILL] icon, then press the left button.
3. Press the left button to adjust the brilliance as appropriate. Each press of the left
button cycles through the brilliance mode settings.
Note: You can adjust the mark and characters brilliance. Refer to section 1.42.
1-6
Brilliance (%) Character color
100 Green
40 White
4 Red
Radar background color
Black
Blue
Black