How To Display Ais Target Data; Ais Pop-Up Information - Furuno FAR-2228-BB Operator's Manual

4. AIS OPERATION
7. Select [3 ETA].
8. Spin the scrollwheel to set the estimated day of the month to arrive, then left-click.
Currently selected digit is
highlighted by the cursor.
Spin the scrollwheel to adjust the day.
Left-click to move to the next digit.
9. Select [4 DESTINATION], then left-click. The software keyboard appears.
10. Use the trackball to highlight a letter or digit on the software keyboard, then left-
click. Repeat until the destination name is entered. (Max. 20 characters)
11. Use the trackball to highlight [END] on the software keyboard, then left-click.
12. Spin the scrollwheel to assign a destination number (1 to 10) to the destination en-
tered at step 9, then left-click. The next time you use this place as your destination,
simply select the corresponding destination number.
13. Select [5 DRAUGHT].
14. Spin the scrollwheel to set the ship's draught (0.0 to 25.5 m), then left-click.
15. Select [6 PERSONS].
16. Spin the scrollwheel to set the number of people on-board (0000 to 8191), then
left-click.
17. Close the menu.
4.9

How to Display AIS Target Data

You can display an AIS target's data by selecting it on the display, when the AIS func-
tion is set for [DISP FILT] or [DISP ALL].
4.9.1

AIS pop-up information

The AIS pop-up shows abbreviated AIS data (Vessel name,
COG, SOG, CPA, TCPA and destination*) for the selected AIS
target. Simply put the cursor on the AIS target to show the pop-
up.
*: Destination appears for Class A targets only.
Note: When the received AIS sentence does not con-
tain certain data, the appropriate section of the pop-up
shows "missing".
The pop-up can be enabled or disabled with the fol-
lowing procedure.
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [4 TT•AIS SYMBOL].
4. Select [8 AIS POP UP INFO].
5. Select [ON] or [OFF] as appropriate.
6. Close the menu.
4-10
XXXXXXXXX
XXXXXXXXX
Pop-up AIS data