SYSTEM CONFIGURATION
IMO-type radar(s) must be interconnected to the following type approved sensors.
For other radar types, it is recommended to connect the following type approved sensors:
•
EPFS meeting the requirements of the IMO resolution MSC.112(73).
•
Gyrocompass (or equivalent devices) meeting the requirements of the IMO resolution A.424(XI).
•
SDME meeting the requirements of IMO resolution MSC.96(72).
The radar may be interconnected via HUB-3000 to other FURUNO processing units having approved
LAN ports.
Standard connection
Basic configuration is shown with solid line. For footnotes, see "Notes" on page x.
X-band (TR-UP), 12 kW/25 kW/600 W
: Standard supply
: Optional or local supply
for FAR-2228-NXT(-BB)/2328-NXT, 600 W
(w/ Performance Monitor PM-32B*
100-115/220-230 VAC
1ø, 50-60 Hz (for de-icer)
RCU-014 or RCU-015 or RCU-031*
Control Unit RCU-016
100-230 VAC
MU-190/MU-231/MU-270W
12-24 VDC
100-230 VAC
Sensors
(IEC61162-450 format)
100-230 VAC
VDR
(IEC61162-450 format)
100-230 VAC
VDR (Analog RGB)
100-230 VAC 1ø, 50-60 Hz
440 VAC 1ø, 50-60 Hz
24 VDC
100/110/120 VAC
1ø, 50-60 Hz
iv
NOTICE
7
)
XN12CF-RSB128-123
XN20CF-RSB128-123
XN24CF-RSB128-123
Sub monitor
Control Unit
11
3
Monitor Unit*
or
3
Monitor Unit*
*11
MU-190HD
Intelligent Hub
5
HUB-3000*
Switching Hub
HUB-100
OR
Intelligent Hub
HUB-3000*
6
Transformer
Rectifier
PR-850A
for FAR-2218(-BB)/2318, 12 kW
(w/ Performance Monitor PM-32A
XN12CF-RSB128-105
XN20CF-RSB128-105
XN24CF-RSB128-105
Antenna Unit
for FAR-2228(-BB)/2328, 25 kW
(w/ Performance Monitor PM-32A
XN12CF-RSB128-106
Antenna
XN20CF-RSB128-106
Cable*
10
XN24CF-RSB128-106
Gyrocompass*
Gyrocompass*
AIS Transponder
EPFS*
SDME (Speed log)
Processor
AMS (IEC61162 format)
Unit
RPU-025
ECDIS
AMS (Contact)*
Sub monitor 1 of ECDIS*
For AC
power
Sub monitor 2 of ECDIS*
USB Mouse
For DC
power
USB Device*
*7
)
*7
)
1
(AD-10 format)
1
(IEC61162 format)
2
(GPS)
4
8
8
9