How To Save Files; How To Handle Sd Cards (Including Sdhc Cards) - Furuno INMARSAT-C FELCOM 18 Operator's Manual

4. FILE OPERATIONS
Go to line
Move the cursor to the desired line in the current file.
• Top of text: Go to top of text
• End of text: Go to end of text
• Go to line: Specify line number to go to.
Press the F2 and 7 keys. Place the cursor where desired then press the Enter key.
Time or Pos. Ins
Insert time or position in a sentence
1. At the [Edit] menu, press the 8 key to select [Time or Pos.
Ins.]
2. Put the cursor where to insert the information then press the 1 key to insert time
or the 2 key to insert position.
4.3

How to Save Files

4.3.1

How to handle SD cards (including SDHC cards)

After you have created a message you may wish to save it to an SD/
SDHC card or the internal memory), for future use. (The internal mem-
ory stores up 2.4GB of TX files.)
Cards 2GB or less do not require formatting. Cards above that capacity must be for-
matted (on the Terminal Unit), and their capacity after formatting is 2GB. (A PC will
also read them as being 2GB.) The following cards have been tested with the Terminal
Unit:
• Panasonic RP-SDP 4, 8, 16, 32GB
• TOSHIBA SD-E 4, 8, 16, 32GB
• HAGIWARA HPC-SD/SDH 2,4GB
How to insert an SD card: Gently insert an SD card into its slot on the front panel of
the terminal unit, connector side down and front. Handle the cards carefully to prevent
damage, which could cause loss of data.
How to format an SD card: Insert the SD card into its slot. Press the F1 and 0 keys.
[Yes] is selected; press the Enter key to format the card.
How to eject an SD card: Press the F1 and 8 keys. [Yes] is selected; press the Enter
key then push the card to release it from the slot.
How to handle SD cards
• Do not remove a card from the slot until a card-related operation is completed, to
prevent loss of data and damage to the card.
4-6
• BUFFALO RSDC-S 2, 8GB
• I-O DATA SD/SDH-V 2,16GB
• SanDisk SDSDB 4, 8, 16, 32GB
Goto Line
1. Top of Text HOME
2. End of Text END
3. Goto Line
Time or Pos. Ins
1. Time
2. Position