How To Change The Echo Color - Furuno FAR-1513-BB Operator's Manual

1. OPERATIONAL OVERVIEW
How to assign/change the brilliance presets
1. Place the cursor on the BRL indication inside the [BRILL] box.
2. Press the left button to cycle through the pre-
sets. There are four available: [BRL1], [BRL2],
[BRL3] and [BRL4].
3. To change the palette for a preset, press the
right button with the preset selected. The
[BRILL] menu appears.
4. Follow steps 2 to 4 in "How to change color palettes" on page 1-63.
5. Repeat the process to change other presets' palettes.
1.43.2

How to change the echo color

1. Select the [BRILL] box at the bottom-left of the screen, then press the right but-
ton. The [BRILL] menu appears.
2. Select [ECHO COLOR], then push the ADJUST knob.
3. Select the appropriate color, then push the ADJUST knob. The available options
are listed in the table below.
Color
YEL
GRN
WHT
AMB
M-GRN
M-CYA
1-64
Yellow echo (default setting)
Green echo
White echo
Amber echo
Red echo, gradually changes to green color as the echo weakens.
Red echo, gradually changes to cyan color as the echo weakens.
Place cursor here,
then press the left
button to change
brilliance preset,
right button to open
the [BRILL] menu.
Description/remarks