Using the Audio Wizard to configure audio volume
About this task
Use this procedure to test and adjust audio settings for optimal voice transmission and reception
quality.
Procedure
1. Select Multimedia > Preferences and then select the Audio list item.
2. Click Launch to start the audio test wizard.
The Audio Wizard window appears.
3. Shut down any other audio applications that are running and click Next to continue.
4. Click Start and begin talking into your microphone.
Ensure that you can hear your voice coming through the speakers or headset.
5. Click Stop to stop the audio recording and playback.
6. If you hear yourself during the audio test call, click Next to end the audio test.
7. If you did not hear yourself during the audio test call, click Settings to display your sound
card Audio Properties window.
8. Click the Volume button from the Sound playback device to display your Volume Control
window.
9. Adjust all volume settings to approximately 80% and close the window.
10. In the Audio Properties window, click the Advanced button in the Sound playback section.
The Advanced Audio Properties window appears showing your speakers setting.
11. Select the appropriate option from the Speaker Setup list. For example, if you use a laptop
without a headset for applications other than the Avaya Aura
the Laptop stereo speakers option.
12. Click OK to save the setting.
13. Select the Performance tab from the Advanced Audio Properties window.
14. Configure the Hardware acceleration to Full and Sample rate conversion quality to Best.
15. Click OK to save the settings.
16. In the Audio Properties window, click the Volume button in the Sound recording section.
The Recording Control window appears.
17. Adjust the microphone setting to approximately 15%.
18. Click the Advanced button to display your Advanced Controls for Microphone window.
19. Ensure that the Microphone Boost check box is not selected.
20. Click Close.
October 2017
®
Avaya Aura
Application Server 5300 Office Client User Guide
Comments on this document? infodev@avaya.com
Using the Audio Wizard to configure audio volume
®
AS 5300 Office Client, select
99