Avaya Aura 5300 User Manual page 83

3. Click OK to close the Configure Video window.
4. Click OK to save your changes or click Cancel to exit without saving.
After the video camera has passed compatibility testing with the AS 5300 Office Client, you
can send and receive video on all calls to other video-enabled clients.
Disabling video transmission
About this task
Use this procedure to disable video transmission from your camera-equipped PC.
Procedure
1. Select Multimedia > Preferences and then select the Video list item to display the Video
settings window.
2. Select the Do not send or receive video on my calls option to disable all video (incoming
and outgoing).
OR
Select the Restrict video to receive-only operation check box to allow other video-enabled
clients to send you video while your Avaya Aura
outgoing video.
3. Click OK to save your changes or click Cancel to exit without saving.
Tip:
Select one of the predefined video configuration settings or the custom video
configuration setting to enable video again.
If video is enabled for all calls (either bidirectional or receive-only), video can be completely
disabled by selecting Do not send or receive video on my calls.
Customizing video configuration
About this task
You should use a custom video configuration with care. The combination of a large video image
size, high-quality codec setting, and high Frames Per Second (FPS) produces video transmission
rates over 1 Mbit/s and erodes network and PC performance. You are encouraged to use one of the
predefined video configurations for everyday use.
Use this procedure to customize your video configuration.
Procedure
1. Select Multimedia > Preferences and then select the Video list item to display the Video
settings window.
2. Click Configure. If this is your first time customizing your video settings, select Custom
setting.
October 2017
®
Avaya Aura Application Server 5300 Office Client User Guide
Comments on this document? infodev@avaya.com
Configuring your preferences
®
AS 5300 Office Client does not send
83