Avaya Aura 5300 User Manual page 84

Advanced setup
The Video Configuration window appears. Advanced users can fine-tune their video
settings from the Video Configuration window.
3. Adjust the custom video configuration using the following guidelines.
This Video Configuration window has the following controls:
• Video Driver: identifies the driver that controls the camera. This is usually Microsoft WDM
Image Capture, but some cameras provide a different driver. This list also includes the
following options:
- disable video for all subsequent calls
- set video to receive-only operation on all subsequent calls
- reset the video configuration to its default values
• Preferred Video Codec drop-down menu: identifies which video CODEC is used. The
available selections are:
- H.263 Codec
- H.263+ Codec
- H.264 Codec
- MPEG4 Codec
The list of available CODECs is dependent on the availability of codecs, preconfigured
by your service provider, and the raw image format that your video camera supports.
The default codec is H.263.
• Codec Quality Settings: allow you to specify the image size and amount of detail in the
transmitted video. Quality settings are:
- Very low bandwidth
- Low bandwidth
- Medium bandwidth
- High bandwidth
- Very high bandwidth
- Custom
High and very high quality transmits the most detailed images but at the expense of
CPU and network bandwidth. The use of Custom quality settings is strongly
discouraged unless you are highly knowledgeable.
In a video call, the two clients negotiate to a common video quality that is acceptable to
both, so delivered image quality may vary from call to call.
• Config button: launches an advanced CODEC configuration dialog box. Defaults are used
based on the Codec Quality Setting selected. To configure one of these CODECs as your
preferred video selection, see
263+ video CODEC
Selecting MPEG4 video CODEC
October 2017
Selecting H.263 video CODEC
on page 87, Selecting H.264 video CODEC
on page 89.
®
Avaya Aura Application Server 5300 Office Client User Guide
Comments on this document? infodev@avaya.com
on page 85, Selecting H.
on page 88, or
84