Avaya Aura 5300 User Manual page 88

Advanced setup
H.263+ custom video
configuration
Improve Resistance to Packet
Loss
Independent Segment
Decoding Mode
5. Click OK.
Both clients in a call must support H.263+ video CODEC in order to send and receive.
However, if either client does not have H.263+, then H.263 video is sent.
The following table lists the H.263+ Codec Quality Settings default values.
Setting
Bitstream
Key Frame Interval
Video Fluidity
Advanced Prediction
Mode
Modified Quantization
and Advanced Intra
Coding
Enable Deblocking Filter
Improve Resistance to
Packet Loss
Independent Segment
Decoding Mode
Selecting H.264 video CODEC
About this task
The different formats that you can use to send and receive video is dependent on whether you have
support for this CODEC. Contact your system administrator for this information or check your
Personal Agent.
Use this procedure to choose H.264 as the preferred video CODEC.
Procedure
1. Click Preferences > Video > Configure.
The Video Configuration window appears.
2. Select H.264 Codec from the Preferred Video Codec drop-down menu.
October 2017
Description
Enabling this setting uses extra CPU processing time, though not
very significantly on modern computer systems.
This setting allows good decoding quality despite packet loss. This
setting allows greatly improved resistance to packet loss, allowing
up to 10-15% packet loss without noticeable video degradation.
This setting improves error resistance further by confining errors to
slices and prevents them from corrupting an entire frame. This
option is useful during packet loss conditions.
Very Low Low
8 64
10 10
100 100
Y Y
Y Y
Y Y
N N
Y Y
®
Avaya Aura Application Server 5300 Office Client User Guide
Comments on this document? infodev@avaya.com
Med High
192 512
8 8
100 100
Y Y
Y Y
Y Y
N N
Y Y
Very High
768
8
100
Y
Y
Y
N
Y
88