Creating A Conference; Leaving A Conference; Controlling A Call With The Avaya Usb Headset - Avaya Aura 5300 User Manual

Multimedia communication

Creating a conference

About this task
You must have two active calls to create a conference. Video is not available during conference
calls.
Use this procedure to create a conference call using the Avaya Aura
Procedure
1. Make a call or answer an incoming call.
2. Place that party on hold.
3. Repeat this process up to the conference port limit. The conference post limit depends on
the number of ports configured by your system administrator.
Note:
In a conference, you take up one port, so the maximum number of people who can join
into a single audio conference is the conference port limit minus one.
4. Click Conference in the call control panel of any Conversation window. The Conversation
window displays the calls that are available to join a conference.
5. Select the calls you want to join to the conference and click Join selection to conference.
A Conference Call window appears.
You do not need to initiate all calls before creating the conference. You can conference in
new calls after the conference is launched.

Leaving a conference

To leave a conference, click Hang Up in the Conference Call window.
The network conference server continues hosting the conference call until only one party remains,
at which time it ends the call.

Controlling a call with the Avaya USB headset

You can control the Avaya Aura
table describes the functionality of each control associated with this device.
October 2017
®
AS 5300 Office Client using the Avaya USB headset. The following
®
Avaya Aura Application Server 5300 Office Client User Guide
Comments on this document? infodev@avaya.com
®
AS 5300 Office Client.
38