Table of Contents
Advertisement
B5 (4 pcs)
Make sure you connect the parts in the same order as shown on the picture.
Make sure the bolts are tightened fully.
Make sure the wheels on the front stabilizer face outwards.
ATTACH THE FOOT REST ASSEMBLY
1. Remove the bolts for the track assembly.
• Pick up the main frame from the rear and fold it up so that it stands as shown in the picture.
• Remove the M8 x 16 mm Hex Socket Head Bolts (B5) and M8 x 16 mm x 1.5 mm Flat
Washers (B7) from the top and the bottom of the Track Mounting Tube with the 6-mm Allen
Key.
• Keep the bolts and washers in a secure place until you reach step 5.
2. Attach the Foot Rest Assembly
• Remove the M8 x 30 mm Hex Socket Head Bolts (B8) and M8 x 16 mm x 1.5 mm Flat
Washers (B7) from the Foot Rest mounting bracket with the 6-mm Allen Key, as shown in
the picture.
Connecting material
B6 (4 pcs)
Connecting material
B5 (4 pcs)
9
Tools
6 mm
Tools
B7 (4 pcs)
6 mm
Advertisement
Table of Contents
