Insportline IN 16384 User Manual page 13

ATTACH THE TRACK ASSEMBLY
•
Hold the Track Assembly and carefully slide it onto the mounting tube of the main frame.
•
Use your hands to carefully tighten two M8 x 16 mm Hex Socket Head Bolt (B5) and M8 x
16 mm x 1.5 mm Flat Washers (B7) on the bottom of the Track.
•
Raise and hold the Seat Carriage Assembly with one hand and with the other carefully
tighten two M8 x 16 mm Hex Socket Head Bolts (B5) and M8 x 16 mm x 1.5 mm Flat
Washers (B7) on the top of the Track.
•
When all four bolts and washers are in place, tighten them securely with the 6-mm Allen Key.
•
Gently lower the Seat Carriage until it stops.
Make sure you connect the parts in the same order as shown on the picture.
Make sure the bolts are tightened fully.
13