ATTACH THE SEAT
•
Remove the four M8 x 16 mm Hex Socket Head Bolts (B5) from the underside of the seat with
the 6-mm Allen Key, as shown in the picture.
•
Attach the Seat to the Seat Carriage Assembly with four M8 x 16 mm Hex Socket Head Bolts
(B5).
•
Tighten the bolts with the 6-mm Allen Key.
NOTE: The front (with shorter edge) of the seat should face the ground.
Connections
B5 (4 pcs)
Make sure you connect the parts in the same order as shown on the picture.
Make sure the bolts are tightened fully.
14
Tools
6 mm