CONTENTS CONTENTS ................................2 SPARE PARTS ............................... 3 INSTALLATION ..............................4 PARTS ................................4 STEP 1: ASSEMBLY FOR FRONT STABILIZER................... 5 STEP 2: ASSEMBLY FOR SEAT ........................5 STEP 3: CONNECTION FOR SEAT POST AND MAIN FRAME ..............6 STEP 4: ASSEMBLY FOR PEDAL ........................6 STEP 5: ASSEMBLY FOR METAL PEDAL ....................
SPARE PARTS You can see all small parts, like screwdriver, washers, nylon caps, and tools, attached with the draft in order to give you conveniency when assembling this machine. All these spare parts are packed in a PE or a packing box. Following is the deflated picture: (9) two pedal gap bushings;...
INSTALLATION Please look at the component picture before your installation, for your correct installation with the following numbers. 45 46 10-R 10-L PARTS Name and specification Name and specification seat post flat washer OD22*ID8.5*2.0T main frame M8 spring washer front stabilizer set M8 nut metal pedal flat washer OD20*ID10.5*2.0...
STEP 1: ASSEMBLY FOR FRONT STABILIZER Put front stabilizer set(3)under the main frame, lock with screws M10*52(39)and flat washers OD20*ID10.5*2.0T (48). STEP 2: ASSEMBLY FOR SEAT Unscrew 4pcs M8*25 screw (50) and 4pcs seat stopper (38) which pre-mounted under seat post (1). Insert seat (15) into seat post (1), lock with 4pcs M8*25 screw (50) and 4pcs seat stopper (38).
STEP 3: CONNECTION FOR SEAT POST AND MAIN FRAME Unscrew 1pcs 1/2*100 screw (42), 2pcs flat washer OD22*ID13*2.0T (43), 1pcs 1/2 nylon nut (44) and 1pcs 1/2 nylon nut cover (52) which are pre-mounted on the main frame. Connect sensor line upper section (58) with sensor line below section (59).
STEP 5: ASSEMBLY FOR METAL PEDAL Take out the metal pedal pin (54) which is pre-mounted on the front stabilizer (3), put the metal pedal (6) into the U-shape metal piece on the front stabilizer set (3), insert and lock with metal pedal pin (54).
COMPLETE PART LIST Name Name seat post flywheel axes belt wheel (include 2pcs 6000 main frame bearing) front stabilizer set belt plastic tube (1) seat fixer seat stopper handlebar M10*52 screw metal pedal M6 flat washer decorate piece M4*20 screw seat wheel cover 1/2*100 screw pedal gap washer...
wheel(1) TERMS AND CONDITIONS OF WARRANTY, WARRANTY CLAIMS General Conditions of Warranty and Definition of Terms All Warranty Conditions stated hereunder determine Warranty Coverage and Warranty Claim Procedure. Conditions of Warranty and Warranty Claims are governed by Act No. 40/1964 Coll. Civil Code, Act No. 513/1991 Coll., Commercial Code, and Act No.