Insportline IN 16384 User Manual page 8

ATTACH THE FRONT STABILIZER
1. Remove the cardboard tube from the front-end stabilizer bracket.
• Loosen the two M8 x 16 Allen Head Bolts in the cardboard tube and remove the tube.
• The two Allen Head Bolts and the cardboard tube are there for transporting purposes and
won't be needed again during the assembly.
2. Attach the front stabilizer
• Remove the four M8 x 16 mm Hex Socket Head Bolts (B5) and M8 x 19 x 1.5 mm Curve
Washers (B6) from the Front Stabilizer (B) with the 6-mm Allen Key as shown in the picture.
• Attach the Front Stabilizer (B) to the Main Frame (A) with four M8 x 16 mm Hex Socket
Head Bolts (B5) and M8 x 19 mm x 1.5 mm Curve Washers (B6), then securely tighten the
bolts with the 6-mm Allen Key.
Bolts (2 pcs)
8
Tools (6 mm)