Carrying Out The Initial Set Up Of The Solar-Log 250, 300, 1200 And 2000 (Manually) - Solar-Log 200 Manual

14.4.1 Carrying out the initial set up of the Solar-Log 250, 300, 1200 and
2000 (manually).
The initial configuration of the Solar-Log 250, 300 and 2000 is performed via a web browser. All of the
device connections need to be established and it is best to connect the Solar-Log™ to an Internet router.
All settings made at the initial startup can be changed later.
Procedure:
•
http://solar-log
Enter the address
•
A selection of display languages is displayed.
•
Select the desired Display Language
•
The browser access control configuration window appears. Click on save after the defining the user
password.
•
Sign in by clicking on the log in button (bottom right).
•
Define the country and time zone. Click on "
•
Select the installation parameters for the component detection. Click on "
" start ."
•
manual installation
After selecting "
appears.
•
After selecting " start
information appears. Click on "
•
The following menus have to be configured:
Internet
Network
Device
Plant and
System
in the address bar of the web browser.
.
save
," the Welcome screen with the interface configuration section
," the detection is started. Once completed, the menu
Configuration " in the configuration bar at the top.
."
manual installation " or
Yield data | System
Installation
75