Explanation Of The Symbols In The Feed-In Power (% Dc) Column; Explanation Of The Values In The Reactive Power Reduction Section - Solar-Log 200 Manual

Accessing Diagnostic values
Current power output (kW):
The value refers to the current output generated by the inverter per interface (column) and for the entire
plant.
Control value power (% AC):
The Solar-Log™ calculates the control value power (kW) as a percentage of the maximum AC power and
relays this to the inverters.
Current power output (AC%):
The value indicates the total output generated as a percentage of the maximum AC power for the inverter
or all of the inverters on a bus.
Feed-in power (% DC):
This value is the current amount of feed-in power as a percentage of the generated output.

17.5.2 Explanation of the Symbols in the Feed-in power (% DC) column:

The feed-in power value is in the target power range with a tolerance of -2% to +1%.
The feed-in power value is below the target value allowed. Generally, this means that the out-
put allowed at the grid connection point is not being achieved due to low irradiation or high
self-consumption.
This means that the value is above the target value allowed.
If the red triangle is only displayed at a bus and entire plant has a green symbol, this means
that only this bus is over the target value allowed. However, the plant totals do not go over the
target value because of self-consumption.

17.5.3 Explanation of the Values in the Reactive Power Reduction Section

The following values are displayed in the Reactive Power Reduction section:
Reactive Power determined by:
The currently active control source is indicated in this field.
Displayed Text
PMC_NONE
PMC_DIAG
PMC_MODBUS_2
PMC_MODBUS_1
PMC_PROFILE
PMC_INTERN
PMC_DM_MODBUS
PMC_DM_RCR
206
Explanation
Text
No control source.
Controlled by the diagnostic mode.
Controlled by the ModBus PM V2 (new ModBusPM).
Controlled by the ModBus PM V1 (old ModBusPM).
Controlled by the PM Profi le.
Controlled by the internal confi guration.
Controlled by direct seller via ModBusDM.
Controlled by direct seller via ripple control receiver