Accessing Notifications; Fig.: Notification Overview - Solar-Log 200 Manual

Accessing Diagnostic values
•
Days:
Under days (default "All days"), you can select individual days or leave the default selection as is.
•
Status codes:
Under status codes (default "All status codes"), you can select individual status codes or leave the default
selection as is.
•
Fault codes:
Under fault codes (default "All fault codes"), you can select individual fault codes or leave the default
selection as is.
By default, the current day is displayed in the table with all devices, fault codes and status codes.

17.4 Accessing Notifications

To access the Notifications menu, go to

Fig.: Notification overview

The notification overview is displayed as a table.
A maximum of 50 messages is displayed in this table. The following columns are displayed:
•
Message date:
Displays when a fault is detected and reported.
•
Send date:
This column displays the date when the message has been successfully sent. Pending is displayed in this
column if there are more send attempts remaining, or aborted after 5 unsuccessful attempts to send the
message.
•
Send Tries:
The number attempts needed to successfully send the message or the number of unsuccessful attempts is
displayed in this column. It is reported as "aborted" after 5 unsuccessful attempts to sent the message. The
number 1 to 5 can be displayed in this column if there are still more send tries remaining ("pending").
•
Message type:
This column displays the type message (for example,
•
Recipient:
The method with which the message is sent is displayed here.
•
Text:
There is the option to display the messages sent by the Solar-Log™ under Text.
200
Diagnostic | Notifications.
Offline
. If an inverter is offline).