Defining The Feed-In Tariff - Solar-Log 200 Manual

Hide thumbs Also See for 200:
Table of Contents

Advertisement

16.4.5 Defi ning the Feed-in tariff
The feed-in tariff is generally used to calculate a PV plant's output in financial terms.
Considering that self-consumption is used at more and more plants, there are also other calculation modes.
General
The plant costs are set in euros in the
ction.
The Yield offsets field is used to manually add the plant's previously yields,
e.g. in cases when the plant was already operational before having a monitoring system installed. These
yields are included in the
yield forecast.
Note!
When using several plant groups, only one plant group can be used with a tariff mode
with self-consumption refund or self-consumption.
Tariff settings
The Solar-Log™ provides four different modes:
Feed-in tariff
Feed-in tariff + Self-consumption refund
Feed-in tariff + Self-consumption
Consumption of Self-produced power
Feed-in tariff mode
All of the power output from the PV plant is completely fed into the grid. Every kilowatt hour is reimbursed
according to the valid remuneration rate.
From date
In this mode, the
The Solar-Log™ calculates the amount of power fed into the grid based on the inverter information.
Feed-in tariff + Self-consumption refund mode
Here a distinction is made between generated power that is fed into the grid and that is directly consumed
(self-consumption). In accordance with feed-in tariff agreements (or renewable energy laws), a bonus is
paid for self-consumption. This provides a financial incentive for self-consumption. To implement this func-
tion, the Solar-Log™ requires an additional consumption meter.
From date
In this mode, the
on refund need to be defined. The electricity prices are entered in an extra tab. The Solar-Log™ calculates
the amount of power fed into the grid based on the inverter information.
Feed-in tariff + Self-consumption mode
In this mode, only the fed-in power is reimbursed. There is still an incentive for self-consumption because
generally the costs for power obtained from the gird are higher than the production costs of self-produced
power.
To implement this function, the Solar-Log™ requires an additional consumption meter.
From date
In this mode, the
electricity prices are entered in an extra tab. The Solar-Log™ calculates the amount of power fed into the
grid based on the inverter information.
General
menu. This value is used for the
rate
and the corresponding
rate
and the corresponding
rate
and the corresponding
Diagnostic | Finances
in cents for the feed-in tariff need to be defined.
in cents for the feed-in tariff and self-consumpti-
for the feed-in tariff need to be defined. The
Configuration Menu
fun-
121

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 200 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

300120025020005001000

Table of Contents

Save PDF