Remote Controlled Active Power Reduction With The Calculation Of Self-Consumption; Lar-Log™ Pm+); 70% Fixed Reduction - Solar-Log 200 Manual

Configuration Menu
Note!
16.12.3 Remote controlled active power reduction with the calculation of
self-consumption (only Solar-Log™ PM+)
This function is an enhancement to the
the previous chapter. This function does not correspond to provisions of the German EEG laws and has to
be arranged with the grid operator before being used.
Note!
The configuration of this corresponds to that already described for the remote controlled active power
reduction.
The instruction for integrating the meters into the electric wiring of the house or building are found in the
appendix.
Notes about
the function!
16.12.4 70% fi xed reduction
By activating this menu item the inverter(s) are controlled to be fixed at 70% of the installed DC power.
Maximum AC Power
Enter the
on | Devices | Configuration
The maximum power output for the inverters can be calculated from the connected generator power value
that has been entered.
160
The notifications per e-mail for active power reductions can be activated from the
guration | Notifications | PM
Remote controlled active power reduction
The Solar-Log PM+ needs to be
linked to a consumption meter to implement this function. Please note the instructions in
chapter "12.5 External power meter".
Self-consumption is taken into account with a command (less than 100% and greater
than 0%). The inverter(s) supply a higher output than the command value by taking the
current consumption into account.
Self-consumption is not taken into account with the 0% command value. As a safeguard
here, the plant is always limited to 0%.
Connected Generator Power
and
menu.
menu.
as reference values in the
Confi-
function described in
Configurati-