Smart Energy; Defining Smart Energy Switching; Fig.: Selecting Switch For Smart Energy - Solar-Log 200 Manual

16.10 Smart Energy

16.10.1 Defining Smart Energy Switching

The switches that are to be used for the Smart Energy function - switching on appliances in certain
consumption or production scenarios - have to be defined and configured (see Chapter 18.1.1. "Configuring
the device interface").
These switches, as described below, can be configured under the device class definition.
Up to 10 switches are available. They can be assigned to either the same manufacturer/model or to diffe-
rent combinations of manufacturers/models.
Procedure:
•
Go to the Configuration | Devices | Definition
Switch
select for the device class.

Fig.: Selecting switch for Smart Energy

•
Manufacturer
The box is displayed. The following selection manufacturers are available:
• AllNet
• Belkin
• Gude
• Solar-Log
•
After that, the Type
ted models can be selected here.
•
Allnet:
• 3000RF
• 3073
• 3075/3076
• 3075/3076V2
• 3075V3
•
Belkin:
• WeMo Insight
• WeMo Socket
•
Gude:
• 1002
• 1100/1001
• 2104
• 2110
• 2301
has to be defined. Depending on the selected manufacturer, all of the suppor-
menu. Go to Interface assignments on
Configuration Menu
and
139