Fig.: Displayed Firmware Update Window; Fig.: Example Of An Unsuccessful Connection Test - Solar-Log 200 Manual

Installation

Fig.: Example of an unsuccessful connection test

Note
If the test is successful, click on the „Next" button to go to the next section. A dialog window appears.
From this window, you can check if a new Solar-Log™ firmware version is available (see image „Displayed
Firmware Update Window").

Fig.: Displayed Firmware Update Window

By clicking on „
that. At the end, the device detection is performed. Otherwise, the device detection menu appears by
No
clicking on „
70
All settings are automatically saved using the „Next" button. With the „Back" button it is
possible to change the settings at any time.
Yes
," the configuration wizard checks for a new firmware version and can install it after
" for the firmware update check.