Configuring Sensors - Solar-Log 200 Manual

Configuration Menu
16.3.6 Confi guring sensors
Under sensors, the configuration only comprises of activating other sensors.
Procedure:
•
Ambient Temperature
Use the
•
If needed, make assignments to the module field.
•
SAVE the settings.
Module Fields, Power Output and Descriptions
Depending on the device type (power meter, inverter, etc.), different settings can adjusted from the
le Fields, Power Output and Descriptions
•
Configuring inverters
•
Configuring power meters
•

Configuring sensors

In this section, for example, the device name can be changed and the nominal power (maximum AC out-
put) of the individual devices can be defined.
The nominal power (maximum AC output) if the average consumption or the average energy production
of a device and is used, for example, for the profile controls (Smart Energy).
Note!
112
and/or
The most exact that the configured nominal power corresponds to the actual consumpti-
on, the more accurately the control of consumption via Smart Energy is.
Wind activate
button to
menu. See the following chapters:
the sensors.
Modu-