Connecting The Allnet Network Power Socket To The Solar-Log - Solar-Log 200 Manual

Connecting accessories

12.11.1 Connecting the Allnet network power socket to the Solar-Log™

The Allnet socket has to be defined with the device detection function to connect to the Solar-Log™. From
Configuration | Devices | Definition
the WEB interface of the Solar-Log™ go to and select the device class
"Switch" with the blue plus symbol and then Allnet as the manufacturer followed by the type and number
Configuration | Devices | De-
of devices. Confirm the selection with OK and start the detection from the
tection
menu. Let the detection process run completely. After that, select the corresponding devices from
Configuration | Devices | Configuration
the menu, enter the IP address and perform the rest of the setup.
Click on save once everything is finished.
62