Safety Information - Solar-Log 200 Manual

4 Safety information

In order to protect people, the product itself, and other equipment, please pay attention to the following
before handling the product:
•
the content of this manual,
•
the safety information,
•
the warning signs and type plates attached to the product.
This manual is intended for solar energy technicians and qualified electricians who are installing a
Solar-Log 250 (read the additional information below), 300, 1200 and 2000, wiring them to inverters, con-
figuring them to operate in particular systems, and putting them into operation.
All the actions described in this manual for wiring and working on inverters must be carried out only by
specially trained electricians. All repairs should only be carried out by similarly trained personnel, or by the
manufacturers themselves.
Solare-Datensysteme GmbH is not liable for any personal injuries, property damages and system malfunc-
tions and their consequences which result from not adhering to the product documentation.
Note!
The Solar-Log 300 functions described in this manual are essentially identical to tho-
se of the Solar-Log 250. Refer to the Solar-Log 250 data sheet for the differences.
Safety information
13