Solar-Log 200 Manual page 267

Importing the yield data section
This function imports the yield data from the solarlog_backup.dat file
into the Solar-Log™.
Note!
The Solar-Log™ has to be configured or the configuration file needs to be imported befo-
re yield data can be imported.
Procedure:
•
Select Import yield data.
•
Backup files are searched for on the USB stick that is directly plugged into the
•
Start this .
search
•
When a backup is found on the USB stick, click on
•
The data is being imported
Please wait .
•
The reboots itself.
Solar-Log™
•
The yield data has been imported.
Importing configuration section
This function imports the configuration file from the solarlog_config.dat file into the Solar-Log™.
Note:
The firmware file needs to be in the USB stick's root directory.
Procedure:
•
Select Import configuration.
•
Backup files are searched for on the USB stick that is directly plugged into the
•
Start this search .
•
When a configuration file is found on the USB stick, click on
•
The data is being imported.
Please wait .
•
The Solar-Log™ reboots itself.
•
The file has been imported.
configuration
Firmware update section
This function imports a new firmware version into the Solar-Log™ without using a computer.
Solar-Log™ firmware files have the following names:
firmware_2000e_3.6.0-89-17xxx.bin
Note:
The firmware file needs to be in the USB stick's root directory.
Procedure
•
Select firmware update.
•
A firmware file is searched for on the USB stick that is directly plugged into the
•
Start this search .
•
When a firmware file is found on the USB stick, click on Next to import it.
Next
.
Direct Device Configurations (Solar-Log 1200 and 2000)
to import it .
Next
to import it.
Solar-Log™.
Solar-Log™.
Solar-Log™.
267