Reset - Solar-Log 200 Manual

Restoring backup from USB section
This function restores a backup file with the name solarlog_backup.dat from the
USB stick connected directly to the device to the Solar-Log™.
Procedure
•
RESTORE.
Click on
•
A configuration file is search for on the connected USB stick
First it looks in the main directory of the USB stick for solarlog_backup.dat, then it looks in the /ba-
ckup directory. And lastly it looks in the backup directory for solarlog_backup_YYMMDD.dat. When
it looks for the solarlog_config_YYMMDD.dat. file, it loads the latest file.
•
Start this search .
•
When a configuration file is found on the USB stick, click on
•
The backup is being restored. Please wait a moment.
•
The Solar-Log™ reboots itself.
•
The configuration file was imported.

16.15.5 Reset

Configuration | Data | Reset
The
•
Reset the yield data
•
Reset the inverter configuration
•
Restore factory settings
Resetting the yield data section
In certain circumstances after an inverter detection, it may occur that incorrect or unusable data is display-
ed. In this case, the stored data can be deleted without having to reconfigure the Solar-Log completely.
Procedure
•
Click on RESET
•
If you are sure that the data should be deleted, click on Continue. Otherwise click on Cancel
•
The data is being deleted
•
The Solar-Log™ reboots itself
menu offers the following functions:
Restore to import it.
Configuration Menu
181