Promise Technology Network Device EX4650 User Manual page 225

Examples
rc
rc -a start -l3 -n -p
rc -a start -l3
rc -a stop -l2
rb
Usage
rb [-a <action>] [-d <DaId>] [-s <SeqNo>]
rb -a start -d <DaId> -s <SeqNo> -p <PdId>
rb -a stop -d <DaId> -s <SeqNo>
rb -a pause -d <DaId> -s <SeqNo>
rb -a resume -d <DaId> -s <SeqNo>
Summary
The rb command starts, stops, pauses, and resumes a Rebuild and monitors the
progress of a running Rebuild.
Options
-a <action>
list
start
stop
pause
resume
-d <DA ID>
-s <sequence Num>
-p <PD ID>
Examples
rb
rb -a start -d0 -s2 -p10
rb -a stop -d0 -s2
Specifies action to perform.
(Default) Displays the running and paused Rebuilds and
their status.
Starts a manual Rebuild.
Stops a Rebuild.
Pauses a Rebuild.
Resumes a paused Rebuild.
Specifies which disk array on which to perform the
Rebuild.
Specifies the sequence number of the failed physical
drive. The source drive of the Rebuild.
Specifies the ID of the replacement physical drive. The
target drive of the Rebuild.
211
Chapter 6: Management with the CLI